Tutorial How To Flash Lenovo A6000 TWRP 2.8.6.1 Kitkat (SevenMaxs)

Favnetsoft.Com - This is a custom recovery favorite for Lenovo A6000. TWRP 2.8.6.1 by Sevenmaxs developed specifically for Lenovo A6000/Plus running Android Kitkat. If your device is running Android Lollipop, you can use TWRP 2.8.7.7 Lollipop. Now, how to flash Lenovo A6000 TWRP 2.8.6.1 by Sevenmax on Lenovo A6000/Plus?

Tutorial How To Flash Lenovo A6000 TWRP 2.8.6.1 Kitkat (SevenMaxs)

Pre-Requisites Before Flash Lenovo A6000 TWRP 2.8.6.1

  • Your device running Android Kitkat (Important)
  • Backup of your personal data
  • Make sure the battery capacity charged more than 40%
  • Download and install Lenovo A6000 USB driver
  • Download and install Minimal ADB and Fastboot Tool
  • Download Lenovo A6000 TWRP 2.8.6.1 Kitkat by SevenMaxs

Disclaimer

Rooting or installing a custom rom or recovery might brick your device or your  device may act abnormally and you also lose the device warranty. You may even get a dead SD card which might not work or you can leave your device in a dead state. Before going through the entire tutorial please be advised that it is your own responsibility to go further. We are not  liable for any loss of data or any property of yours by any mean.

Step by Step Flash Lenovo A6000 TWRP 2.8.6.1 Kitkat

  1. Extract A6K2861SMKK444-droiddosh.com.zip
  2. Copy the recovery.img file to C:\Program Files (x86)\Minimal ADB and Fastboot or C:\Program Files\Minimal ADB and Fastboot directory
  3. Power off your device
  4. Go to bootloader mode by hold down Volume Down and Power Button together
  5. Connect your device to computer through USB cable
  6. Now go to the folder where the Minimal ADB And Fastboot program is installed (C:\Program Files (X86)\Minimal ADB And Fastboot)
  7. Hold shift button and Right-Click on an empty space and select “Open Command Window Here” option, a command window will open up

  8. Tutorial How To Flash Lenovo A6000 TWRP 2.8.6.1 Kitkat (SevenMaxs)
  9. Now, enter the following command to check whether your device is recognized by the computer

  10. fastboot devices

  11. If you see a device id, then your device is connected successfully.

  12. Tutorial How To Flash Lenovo A6000 TWRP 2.8.6.1 Kitkat (SevenMaxs)

  13. Enter the following command to flash the Lenovo A6000 TWRP 2.8.6.1 by SevenMaxs

  14. fastboot flash recovery recovery.img

  15. Once the recovery image is flashed, enter the following command to reboot

  16. fastboot reboot

Now you have successfully finished flashing the Lenovo A6000 TWRP 2.8.6.1 Kitkat. Once your device reboots, switch it off and press the Volume Down, Volume Up and Power Button simultaneously to boot into the TWRP recovery mode.
Share This :



sentiment_satisfied Emoticon