How to Install twrp Recovery and Root inew V7A

label
label
label
Root Recovery for inew V7A-
cwm Recovery and Root Guide now available for inew V7A, you can install custom recovery and Root inew V7A by Following Below Guide,
 
this guide will help you to install twrp Recovery and Root inew V7A, you can install twrp Recovery on inew V7A by using Sp flash tools, inew V7A is a low budget smartphone come with 5 inch touch screen display corning with gorilla Glass, it has a 2GB of RAM and 16GB of internal Storage expandable up to 64GB via SD card, the inew V7Ais run on android 4.4 kitkat os powered by a mediatek Mt6582 Processor,

after twrp installation you can Root inew V7A by flashing Latest SuperSu.zip, Rooting may allow custom, Rom, custom zip file installation on android Devices, you can also tweak your Device by using xposed Framework, follow Below Guide to install twrp Recovery and Root inew V7A,
Note-
  • This ROM/Recovery is work on Listed Device only. Don’t try this on any other device.otherwise it cause bootloop,
  • Follow the steps correctly otherwise you may brick your device. We are not responsible for any damage to your phone.
  • It will erase all your data, so we advise you first to take a complete backup of your phone and then proceed.
  • Ensure that your phone has at least 50-60% charged to prevent the accidental shutdown in-between the process
Requirements-
Read Also-
How to Install twrp Recovery on inew V7A-
Step 1.Download sp flash tools from above link and extract in a folder.{you can Extract on Desktop For Batter navigation,

Step 2.install correct adb and Vcom driver in your PC from above link.[wrong Driver installation cause failure]

Step 3.Download[Tools, Rom, Recovery Etc} from above for your device and extract in a folder.

Step 4.go to extracted Sp tools folder and run sp flash tools exe file.{extracted In Above Steps]

Step 5.in sp tools go to Download tab and click on load scatter file and select scatter file from stock Rom folder.

Step 6.select what you want flash Select Whole Rom {in custom Recovery case Check Recovery Only}

Step 7.Remove battery of your phone and click on download button and immediately connect your smartphone into PC  using usb.{if Not Detect then insert battery and connect}
Step 8.wait while flashing is complete it take a few minut to flash after success.insert battery and you are done switch on your smartphone,
How To Root inew V7A-
  • Download Super su.zip file From above and put into Root of sd card/Device Storage.
  • Now connect Device into PC open cmd in adb folder and type bellow command to boot device into Recovery.
adb reboot recovery
  • You can Also boot Device into Recovery By holding power and volume up button same time in switch of mod.
  • make a factory Reset
  • make a nandroid backup
  • Now Click on install zip from SD card navigate supersu.zip file and confirm install.
  • after some seconds it say success , ok you are done make a system Reboot.
So this is a Complete Guide to Install twrp recovery and inew V7A, if you have any question Let us Know Via Comment,
Search tag-
rootinew V7A, twrp for inew V7A cwm recovery for inew V7A, custom Rom for inew V7A recovery install on inew V7A, download recovery for inew V7A root guide for inew V7A, cara root inew V7A, rooten inew V7A, step to install custom ROm inew V7A unbrick inew V7A, cm13 for inew V7A, lineage os,
Share This :



sentiment_satisfied Emoticon