How to install TWRP Recovery for ZTE Nubia Z9 Max

Downloads

TWRP for ZTE Nubia Z9 Max: Download here

TWRP Instillation :

 1 – Connect your ZTE Nubia Z9 Max to your PC using the USB Data cable.

 2 – Open Command Prompt and type the following command

adb devices

You should be getting a message saying ‘List of devices attached’ along with your device name. This will confirm that adb has recognized your device.

If you don’t see your device it means you haven’t properly installed your device USB drivers.

 3 – Next reboot your device in fastboot/bootloader mode by typing this command in Command prompt

adb reboot bootloader

 4 – Now change the directory of your Command prompt to your Desktop by typing this command

cd Desktop

Note: If you had downloaded the files elsewhere, then you need to enter that location instead. (Eg: cd Documents)

 5 – Type the following command next and press Enter

fastboot -i 0x19d2 flash recovery twrp_en_nx510j_dianlujitao.img

This will flash TWRP custom recovery on your ZTE Nubia Z9 Max replacing the stock recovery.

 6 – Once the flashing is complete, select RECOVERY from the Fastboot menu to enter Recovery Mode, use the volume keys to navigate.

 7 – If you see the TWRP logo, then you have successfully performed the s on you now have TWRP custom recovery installed on your ZTE Nubia M9 Max!

 8 – You will now see the TWRP Touch Recovery menu. Select ‘Reboot’ to reboot you device and exit from the recovery.

How to access Recovery Mode?

Switch off your phone and switch it on again while holding the Volume Up + Power buttons together, you will directly enter the TWRP Touch Recovery Menu.