How to Flash VIVO Devices using QComDLoader

Flashing Guide for Vivo Devices Using QComDLoader-

Step By Step guide to Install official Firmware on Vivo Devices using QComDLoader, this is a unique Guide to install official Firmware on all vivo Devices that run on Qualcomm Chipset,

Note-

• This ROM is work on Listed Device only. Don’t try this on any other device.otherwise it cause bootloop,
• Follow the steps correctly otherwise you may brick your device. We are not responsible for any damage to your phone.
• It will erase all your data, so we advise you first to take a complete backup of your phone and then proceed.
• Ensure that your phone has at least 50-60% charged to prevent the accidental shutdown in-between the process. 

Downloads-

• Here

How to Use QcomDLoader Tools-

Step 1: Download and extract QcomDloader Tool on your computer. After extracting, you will be able to see the following files:

Step 2: Now, Install the Qualcomm USB Driver on your Computer (if you have already installed the Qualcomm USB Driver on your computer then SKIP this step).

Step 3: Once you have successfully installed the Qualcomm USB Driver, then Connect your device to the computer (using USB cable).

Step 4: Once your device is connected to the computer, Open QcomDloader.exe.

Step 5: Once, QcomDloader Tool is launched, you will be able to see the following interface:
Step 6: Now, Click on the Load Button and locate the Qualcomm Firmware of your Device.
Step 7: Now, Click on the Settings Button and Select Download Mode as Upgrade.
Step 8: Under Download Settings, Tick Validate Downloaded ROM.

Step 9: Now, Leave the eMMC Programmer, Raw program, Patch0 Box as it is. But, you may need to change it, if the name of respected file is not same as written in the Box. 

For example: If you Open the Qualcomm Firmware Folder (assuming you have already downloaded the firmware), you will find various files of which 3 main files are read by QcomDloader to Flash the extire package i.e prog_emmc_firehose_8916.mbn, rawprogram_unparse.xml, patch0.xml.

If in case the eMMC file name is different, then simply write the exact name in QcomDloader, so that it can recoginize the firmware.

Step 10: Now, Under chipset ID write the Chipset number (here eMMC file name if prog_emmc_firehose_8916.mbn of which 8926 is the Chipset ID).

Step 11: Now, Click OK to exit the configuration interface.

Step 12: Now, Click on Start Button to begin the Flashing process.

Step 13: Once, Flashing is completed you will be able to see Green Passed message.

So this is a Complete Guide to Flash vivo Devices using QcomDloader is you have any question let us know via Comment,
Source- androidmtk,
Search tag-

stock rom for vivo, flash vivo devices, vivo flash tools, vivo flashing guide, install rom on vivo, firmware flashing on vivo, flash file instructions for vivo, como instaler rom  on vivo, para install stock rom on vivo, flashing gudie for all vivo download, dowload vivo flash tools, vivo flash tools free,