How to Install twrp Recovery and Root Galaxy J7 Prime

Root twrp for Galaxy J7 Prime-

Install twrp Recovery and Root Galaxy J7 Prime, in this article will Show you how to install latest twrp Custom Recovery and Root Galaxy J7 Prime,

Step by Step Guide to Install twrp Recovery and Root Galaxy J7 Prime, here is a Latest custom Recovery for Galaxy J7 Prime which is help you to Root your Galaxy J7 Prime, you can Install twrp Recovery via odin and then Root Galaxy J7 Prime by flashing latest SuperSu.zip, be Remember Rooting may void your Device warranty so create a backup before doing anything,Samsung Galaxy J7 Prime smartphone was launched in September 2016. The phone comes with a 5.50-inch touchscreen display with a resolution of 1080 pixels by 1920 pixels at a PPI of 401 pixels per inch. 

The Samsung Galaxy J7 Prime[Root] is Run on android 6.0 OS powered by 1.6GHz octa-core Exynos 7870 processor and it comes with 3GB of RAM. The phone packs 16GB of internal storage that can be expanded up to 256GB via a microSD card. As far as the cameras are concerned, the Samsung Galaxy J7 Prime packs a 13-megapixel primary camera on the rear and a 8-megapixel front shooter for selfies.The Samsung Galaxy J7 Prime is a dual SIM (GSM and GSM) smartphone that accepts Nano-SIM and Nano-SIM. Connectivity options include Wi-Fi, GPS, Bluetooth, FM, 3G and 4G (with support for Band 40 used by some LTE networks in India). Sensors on the phone include Proximity sensor and Accelerometer.

Note-

• This ROM/Recovery is work on Listed Device only. Don’t try this on any other device.otherwise it cause bootloop,
• Follow the steps correctly otherwise you may brick your device. We are not responsible for any damage to your phone.
• It will erase all your data, so we advise you first to take a complete backup of your phone and then proceed.
• Ensure that your phone has at least 50-60% charged to prevent the accidental shutdown in-between the process,

Downloads-

• Cwm
• SuperSu.zip
• odin and Samsung Driver

How to install CWM Recovery-
After downloading the required files make sure your system has an active Samsung USB Driver or you can simply download it from here
Also don't forget to Enable USB Debugging & Unlock OEM, this can be done by going to Developer Options and make sure to have these 2 boxes checked.
Then go to Lockscreen and Security under Settings and enable Unknown Sources.
With these done we are ready to kick-off!

Step by Step Instructions-
STEP 1 : Connect your phone to your computer & Allow access to your device when the MTP Connection box pops up

STEP 2 : Now go to the ROOT J7 PRIME(2016) folder ( you will need to extract the rar file) you just downloaded and run 1-EnterDownloadMode.bat

STEP 3 : Wait for the phone to reboot into Download Mode ( If nothing happens after running 1-EnterDownloadMode.bat then you might need to disconnect and reconnect your USB cable and Allow USB Debugging (Check Always allow from this computer) when it prompts you. With this done, your device should automatically reboot into Downloading Mode.

STEP 4 : In Downloading Mode Run Odinv3.10.7.exe (Found in ROOT J7 PRIME(2016) folder) and click on AP and open,
SM-G610_cwm.tar from ROOT J7 PRIME(2016) folder
After this go to Options in Odinv3.10.7.exe and uncheck both Auto Reboot & F Reset Time and finally click on start to execute the installation of CWM recovery. Wait for it to finish (When it says 'PASS!') and after that press and hold the Volume Down, Power and Home Button together ( To get out of download Mode ) and when you see the phone gets rebooted press and hold Volume Up, Power button and Home button to boot into CWM Recovery

STEP 5 : Enjoy! You now have CWM recovery installed
Second Part: Installing SuperSU
MUST READ
Use Volume buttons and power button in CWM Recovery to navigate through and select the different options.
How to Root-
STEP 1 : In CWM Recovery, go to install zip package and then select install zip from sideload.
At this point you will have to connect your device to your computer and once done run ROOT.bat from ROOT J7 PRIME(2016) folder and wait for it to finish.

STEP 2 : Now run 3-Reboot.bat from ROOT J7 PRIME(2016) folder and you should see your phone get rebooted.

STEP 3 : Enjoy! You have just rooted your phone!

So this is a Complete Guide to Install twrp Recovery and Root Samsung Galaxy j7 prime, if you have any question let us know via Comment,

Search tag-

root Galaxy J7 Prime, twrp Galaxy J7 Prime, root for Galaxy J7 Prime, cara root Galaxy J7 Prime, rooten Galaxy J7 Prime, rooting instructions for Galaxy J7 Prime, root Galaxy J7 Prime without pc, root guide for Galaxy J7 Prime, download root for Galaxy J7 Prime, root Galaxy J7 Prime, cwm recovery for Galaxy J7 Prime, twrp 3.1 for Galaxy J7 Prime, 3.0xx for Galaxy J7 PrimeGalaxy J7 Prime,