How to Install twrp Recovery and Root BQ Aquaris M10 HD

Root Recovery for BQ Aquaris M10-

twrp Recovery and Root Guide now available for BQ Aquaris M10,In this article will Show you How to Install twrp Custom Recovery and Root BQ Aquaris M10,
 

this is a latest twrp Recovery and Root Guide for BQ Aquaris M10, you can Install twrp Recovery on BQ Aquaris M10 using fastboot mod and then Root it by flashing Latest SuperSu.zip via twrp,Rooting may void your Device warranty so please create a nandroid backup before Rooting process, it will help you to restore bootloop, After Rooting you can Install custom Rom, custom Zip on your BQ Aquaris M10 and also tweak it using xposed framework,Follow below Guide to install twrp Recovery and Root BQ Aquaris M10,

Note-

• This ROM/Recovery is work on Listed Device only. Don’t try this on any other device.otherwise it cause bootloop,
• Follow the steps correctly otherwise you may brick your device. We are not responsible for any damage to your phone.
• It will erase all your data, so we advise you first to take a complete backup of your phone and then proceed.
• Ensure that your phone has at least 50-60% charged to prevent the accidental shutdown in-between the process,

Downloads-

• twrp
• SuperSu.zip
• adb, SP flash tools

How to-

Modify boot.img, flash new firmware

SuperSU in systemless mode doesn't work on stock image, as the SuperSU installer can't extract boot.img. You have to repack boot.img.

I tried a SuperSU installer without systemless-mode, but device didn't even boot anymore afterwards.

This guide is derived from a Spanish tutorial on the HTCmania-forum ("Root M10 HD Marshmallow") by yquepongo. Thanks to him!

• Get a firmware for your device from the BQ-website (should be Marshmallow, see above) and unzip it to a directory.
• Extract the boot-verified.img in the firmware directory with a bootimg-extractor. There are various tools available.
  I used bootimg.exe, because this was explained in the mentioned thread and I even used it with wine on Linux and it went well.
• Search for cpiolist.txt in your extracted boot-verified.img and delete the first two lines:
  mode:mtk
  mtk_header_name:ROOTFS
• Repack boot-verified.img and put it back in the firmware directory.
• Flash the modified firmware with the MTK flash tool according to the tutorial on .mibqyyo.com (Title "Hard Reset for the smartphone range Aquaris and Aquaris E"). In short: Disconnect device, start Tool, load scatter file from firmware directory, choose firmware upgrade, start download, connect the device in power off state, download will start automatically.
  This will delete all your data and put the device back to factory rom (hard reset)!!!
• If you don't want to flash the complete firmware, you can flash only the boot-verified.img with "Download only" in the flash tool. I didn't try this and don't know if this is working.
• Start your device, don't activate any security settings to prevent encryption of data partition.

Unlock bootloader, flash TWRP, install SuperSU

• Enable developer settings on device and activate "OEM unlock" in developer settings.
• Reboot into fastboot (adb reboot bootloader) and unlock bootloader (fastboot oem-unlock).
  This will delete all your data!!! Reboot your system afterwards to make sure everything is still ok.
• Do not activate any security settings and make sure your data partition is not encrypted!
  The existing TWRP-image can't handle an encrypted data partition, you will end in a boot loop and have to start the whole process again!
• Double check, your data partition isn't encrypted. (Settings - Security)
• Reboot into fastboot (adb reboot bootloader) and flash the TWRP-image from the TWRP-site (fastboot flash recovery twrpxxx.img)
• After reboot TWRP should start.
• If you have checked that everything is ok (I would recommend a reboot into normal mode), you can install SuperSU with the standard-installer-zip in TWRP.
  If you didn't modify your boot.img, the installer will give a warning that it cannot extract boot.img and you will not find any SuperSU on your system.

So this is a Complete Guide to Install twrp Recovery and Root BQ Aquaris M10, if you have any question let us know via Comment,

Search tag-

root BQ Aquaris M10, twrp BQ Aquaris M10, root guide for BQ Aquaris M10, cara rot BQ Aquaris M10, rooten BQ Aquaris M10, root steps for BQ Aquaris M10, para rot BQ Aquaris M10, root BQ Aquaris M10 without pc, twrp for BQ Aquaris M10 recovery twrp for BQ Aquaris M10, rom download twrp for BQ Aquaris M10, flash twrp on BQ Aquaris M10, twrp custom Recovery for BQ Aquaris M10,