Root Recovery for Chuwi HI10 Pro-
Unzip the archive to PC, but try not to use special characters or folder names with space in the paths to files. Better way is unzip to a folder in the root of drive C: or D:
Turn on ADB-debugging: "Settings"-"About Tablet" >-> Taps under the item "build number" until the caption appears "you became a developer"-> Return one step back-> enter the item for developers "-> Enable" USB debugging ". A popup may appear on tablet. Set remember and press ok. Also enable OEM unlock.
Connect the device to the PC.
Install the Intel driver IntelAndroidDrvSetup1.10.0.exe
ROOT
1. Unlock_Bootloader.bat - Run first. It will unlock the bootloader. Carefully follow the description of the script and on the screen of the tablet. ATTENTION! All settings, programs, as well as all data on internal SDCard will be destroyed! Data on external MicroSD and Windows will not suffer. After unlocking the device will reboot in factory recovery, which does not display anything (stupidly black screen with backlight), the process may take up to 10 minutes, then the device will reboot into Android.
Tablet is now reseted, enable ADB Debugging and OEM-Unlocking again
2. Outside_boot-TWRP-recovery.bat - The device will be rebooted into the temporary session of TWRP-recovery, to Internal sdcard will be placed UPDATE-SuperSU.zip - install it using TWRP. Previously, you can make TWRP backup (recommended!)
3. Flash-TWRP-recovery.bat - (It is optional) TWRP-recovery will be permanently flashed into the Tablet. (Not recommended! Some time firmware will update, TWRP cannot install OTA-update)
4. Flash-ORIGINAL-recovery.bat - (It is optional) Flash back to the original Recovery.
ENABLE EXFAT & NTFS
SuperSU is required for this!
Download attachment, copy hi10pro-android-fs-1.0.4-install.zip to your tablet and flash it in recovery using TWRP. Here
Search tag-
Root twrp now available for Chuwi HI10 Pro, you can Install twrp Recovery on Chuwi HI10 Pro by Following below Guide,
Install twrp Recovery and Root Chuwi HI10 Pro, in this article we will Show you how to install twrp Custom Recovery and Root Chuwi HI10 Pro, after Rooting You can Install Custom Rom, custom Zip file on Chuwi HI10 Pro, you can Also tweak your phone using xposed framework, follow below Guide to Install twrp Recovery and Root Chuwi HI10 Pro,
Note:- - This ROM/Recovery is work on Listed Device only. Don’t try this on any other device.otherwise it cause bootloop,
- This is the stable version of Rom/Recovery.
- Follow the steps correctly otherwise you may brick your device. We are not responsible for any damage to your phone.
- It will erase all your data, so we advise you first to take a complete backup of your phone and then proceed.
- Ensure that your phone has at least 50-60% charged to prevent the accidental shutdown in-between the process
- How to Repair IMEI Number on Android Devices
- Backup Stock Rom on Android without Recovery
- How to Increase Internet Speed {signal} On Android Devices
Unzip the archive to PC, but try not to use special characters or folder names with space in the paths to files. Better way is unzip to a folder in the root of drive C: or D:
Turn on ADB-debugging: "Settings"-"About Tablet" >-> Taps under the item "build number" until the caption appears "you became a developer"-> Return one step back-> enter the item for developers "-> Enable" USB debugging ". A popup may appear on tablet. Set remember and press ok. Also enable OEM unlock.
Connect the device to the PC.
Install the Intel driver IntelAndroidDrvSetup1.10.0.exe
ROOT
1. Unlock_Bootloader.bat - Run first. It will unlock the bootloader. Carefully follow the description of the script and on the screen of the tablet. ATTENTION! All settings, programs, as well as all data on internal SDCard will be destroyed! Data on external MicroSD and Windows will not suffer. After unlocking the device will reboot in factory recovery, which does not display anything (stupidly black screen with backlight), the process may take up to 10 minutes, then the device will reboot into Android.
Tablet is now reseted, enable ADB Debugging and OEM-Unlocking again
2. Outside_boot-TWRP-recovery.bat - The device will be rebooted into the temporary session of TWRP-recovery, to Internal sdcard will be placed UPDATE-SuperSU.zip - install it using TWRP. Previously, you can make TWRP backup (recommended!)
3. Flash-TWRP-recovery.bat - (It is optional) TWRP-recovery will be permanently flashed into the Tablet. (Not recommended! Some time firmware will update, TWRP cannot install OTA-update)
4. Flash-ORIGINAL-recovery.bat - (It is optional) Flash back to the original Recovery.
ENABLE EXFAT & NTFS
SuperSU is required for this!
Download attachment, copy hi10pro-android-fs-1.0.4-install.zip to your tablet and flash it in recovery using TWRP. Here
Search tag-
Root Chuwi HI10 Pro, twrp Chuwi HI10 Pro, cara Root Chuwi HI10 Pro, rooten Chuwi HI10 Pro, root instructions for Chuwi HI10 Pro, rootenChuwi HI10 Pro, root Chuwi HI10 Pro without pc, root Chuwi HI10 Pro step by step, custom rom for Chuwi HI10 Pro, cm14 for Chuwi HI10 Pro, rom install on Chuwi HI10 Pro rom file download for Chuwi HI10 Pro, rom installation guide for Chuwi HI10 Pro, twrp and root Chuwi HI10 Pro,
comment 0 التعليقات:
more_vertsentiment_satisfied Emoticon