How to Install Stock Rom unbrick Panasonic Eluga Pulse X

Official Rom for Panasonic Eluga Pulse X-

Download and Install Stock Rom on Panasonic Eluga Pulse X, in this article we will, Shown you How to Install official Firmware on Panasonic Eluga Pulse X,

This is a Latest Stock Rom/ firmware/ flash file for Panasonic Eluga Pulse X and here is a Step by Step guide to unbrick Panasonic Eluga Pulse X, recently Panasonic Release Eluga pulse X Smartphone with Some Good Features, The Panasonic Eluga Pulse X is Run on Android 6.0 OS powered by 1.25GHz quad-core it comes with 3GB of RAM. The phone packs 16GB of internal storage that can be expanded up to 128GB via a microSD card. As far as the cameras are concerned, the Panasonic Eluga Pulse X packs a 13-megapixel primary camera on the rear and a 5-megapixel front shooter for selfies.Follow Below Guide to Install Stock Rom on Panasonic Eluga Pulse X,

Firmware Details-

Device- Panasonic Eluga Pulse X

OS- Android 6.0

gapps- included

Language- multi

Root access- Not

Chip- mediatek MT6737M

Note-

• This ROM/Recovery is work on Listed Device only. Don’t try this on any other device.otherwise it cause bootloop,
• This is the stable version of Rom/Recovery.
• Follow the steps correctly otherwise you may brick your device. We are not responsible for any damage to your phone.
• It will erase all your data, so we advise you first to take a complete backup of your phone and then proceed.
• Ensure that your phone has at least 50-60% charged to prevent the accidental shutdown in-between the process,

Related to your Device-

• How to Install Xtram Music pure audio on any Android Device
• How to install Xposed Framework on Any android Device
• How to Install htc Gallery on any Android Device
• How to Install Dolby Atoms on Any android Device

Requirements-

• Sp Flash tool latest Support MT67XX / or Use From Rom
• pc and usb
• vcom Driver must installed
• Firmware Panasonic pulse X MT6737M

How to Install Stock Rom on Panasonic Eluga Pulse X-
Step 1.Download SP flash tools from above link and extract in a folder.{you can Extract on Desktop For Batter navigation,

Step 2.Install correct adb and Vcom Driver in your PC from above link[wrong Driver installation cause failure]

Step 3.Download[Tools, Rom, Recovery Etc} from above for your device and extract in a folder.

Step 4.Go to extracted SP tools folder and run sp flash tools exe file.{extracted In Above Steps]

Step 5.in SP tools go to Download tab and click on load scatter file and select scatter file from stock Rom folder.

Step 6.select what you want flash Select Whole Rom {in custom Recovery case Check Recovery Only}

Step 7.Remove battery of your phone and click on download button and immediately connect your smartphone into using usb.{if Not Detect then insert battery and connect}

Step 8.wait while flashing is complete it take a few minut to flash after success.insert battery and you are done switch on your smartphone.

So This is the Complete Guide to Install Stock Rom on Panasonic Eluga Pulse X if you have any question Let Us Know Via Comment,
Search tag-

Stock rom for Panasonic Eluga Pulse X, custom Rom for Panasonic Eluga Pulse X, flash file for Panasonic Eluga Pulse X, rom file download for Panasonic Eluga Pulse X, cara flash Panasonic Eluga Pulse X, rom install on Panasonic Eluga Pulse X, rom installation Guide for Panasonic Eluga Pulse X, firmware download for Panasonic Eluga Pulse X, unbrick Panasonic Eluga Pulse X,