How to Install Stock Rom on TECNO i3 Pro

Official Rom for TECNO i3 Pro-

official Firmware now available for TECNO i3 Pro, you can download and install this Rom on TECNO i3 Pro by Following Below Guide,

 

This is a latest Stock Rom/ firmware/ flash file for TECNO i3 Pro and Here we will Show you How to install Stock Rom on TECNO i3 Pro, TECNO i3 Pro is a Latest budget smartphone come with android 7.0 Nougat OS powered by a Mediatek Mt6737M processor,TECNO i3 Pro is a Dual sim smartphone that accept 2 Regular sim card connectivity,in connectivity it has 4G, 3G, wifi, bluetooth and Gps features, sensor include proximity, gravity etc,

Stock Rom for TECNO i3 Pro come with a Full package that contain official firmware flash tools driver and a scatter file so you can install Stock Rom on TECNO i3 Pro easily via SP flash tools,follow below Guide to install Stock Rom on TECNO i3 Pro,

Firmware Details-

Device- TECNO i3 Pro

OS- Android 7.0

Chipset- Mediatek 

Language- English/multi

Gapps- included

Root Access- Not

Note-

• This ROM/Recovery is work on Listed Device only. Don’t try this on any other device.otherwise it cause bootloop,
• Follow the steps correctly otherwise you may brick your device. We are not responsible for any damage to your phone.
• It will erase all your data, so we advise you first to take a complete backup of your phone and then proceed.
• Ensure that your phone has at least 50-60% charged to prevent the accidental shutdown in-between the process

Requirements-

• Sp Flash tool latest Support MT67XX / or Use From Rom
• pc and usb
• vcom Driver must installed 
• Rom i3 Pro

Read also-

• How to repair IMEI on Qualcomm Devices
• How to Port twrp for MT67XX Devices [without Source] 
• How to Repair IMEI Number on Mediatek Devices[ All methods]
• How to Flash Qualcomm Devices Using Qualcomm Upgrade tools,

How to Install Stock Rom on TECNO i3 Pro-
Step 1.Download SP flash tools from above link and extract in a folder.{you can Extract on Desktop For Batter navigation,

Step 2.Install correct adb and Vcom Driver in your PC from above link[wrong Driver installation cause failure]

Step 3.Download[Tools, Rom, Recovery Etc} from above for your device and extract in a folder.

Step 4.Go to extracted SP tools folder and run sp flash tools exe file.{extracted In Above Steps]

Step 5.in SP tools go to Download tab and click on load scatter file and select scatter file from stock Rom folder.

Step 6.select what you want flash, Select Whole Rom {in custom Recovery case Check Recovery Only}

Step 7.Remove battery of your phone and click on download button and immediately connect your smartphone into PC using usb.{if Not Detect then insert battery and connect}

Step 8.wait while flashing is complete it take a few minut to flash after success.insert battery and you are done switch on your smartphone.

So This is the Complete Guide to Install Stock Rom on TECNO i3 Pro if you have any question Let Us Know Via Comment,
Search tag-

Stock Rom for TECNO i3 Pro, flash file for TECNO i3 Pro firmware for TECNO i3 Pro rom download for TECNO i3 Pro cara flashTECNO i3 Pro, unbrick TECNO i3 Pro rom installation guide for TECNO i3 Pro, rom download instructions for  TECNO i3 Pro, unbrick TECNO i3 Pro, rom file for TECNO i3 Pro rom download cara for TECNO i3 Pro, flashing guide for TECNO i3 Pro,