How to unbrick Install Stock Rom on TECNO Phantom 6S

Official Rom for TECNO Phantom 6S-

official Firmware now available for TECNO Phantom 6S and today we will Show you how to Install Stock Rom on TECNO Phantom 6S,

 

This is a Latest Firmware/ flash file/ Stock Rom for TECNO Phantom 6S and here is a Step by Step Guide to Download and install Stock Rom on TECNO Phantom 6S, TECNO Phantom 6S is a budget smartphone come with android 6.0 OS powered by a Mediatek MT6755 Processor, the TECNO Phantom 6S is a Dual sim smartphone that accept 2 Regular sim card connectivity,in connectivity it has 4G, 3G, wifi, bluetooth and GPS features, sensor include proximity, gravity etc,

Stock Rom for TECNO Phantom 6S come with full Reference package that contain official Firmware, Driver, flash tools etc, take a backup of your personal data before flashing, because flashing the Rom will erase all your personal data, follow Below Guide to Install Official Rom on TECNO Phantom 6S,

Firmware Details-

Device- TECNO Phantom 6S

OS- Android 6.0

Chipset- Mediatek 6755

Language- English/multi

Gapps- included

Root Access- Not

Note-

• This ROM/Recovery is work on Listed Device only. Don’t try this on any other device.otherwise it cause bootloop,
• Follow the steps correctly otherwise you may brick your device. We are not responsible for any damage to your phone.
• It will erase all your data, so we advise you first to take a complete backup of your phone and then proceed.
• Ensure that your phone has at least 50-60% charged to prevent the accidental shutdown in-between the process

Download tools to Install Stock Rom on TECNO Phantom 6S-

File Name	Downloads
SP flash tools V5.2XX	Download
Stock Rom 6S	Download
Vcom Driver [Latest]	Download

Read also-

• How to repair IMEI on Qualcomm Devices
• How to Port twrp for MT67XX Devices [without Source] 
• How to Repair IMEI Number on Mediatek Devices[ All methods]
• How to Flash Qualcomm Devices Using Qualcomm Upgrade tools,

How to Install Stock Rom on TECNO Phantom 6S-
Step 1.Download SP flash tools from above link and extract in a folder.{you can Extract on Desktop For Batter navigation,

Step 2.Install correct adb and Vcom Driver in your PC from above link[wrong Driver installation cause failure]

Step 3.Download[Tools, Rom, Recovery Etc} from above for your device and extract in a folder.

Step 4.Go to extracted SP tools folder and run sp flash tools exe file.{extracted In Above Steps]

Step 5.in SP tools go to Download tab and click on load scatter file and select scatter file from stock Rom folder.

Step 6.select what you want flash, Select Whole Rom {in custom Recovery case Check Recovery Only}

Step 7.Remove battery of your phone and click on download button and immediately connect your smartphone into PC using usb.{if Not Detect then insert battery and connect}

Step 8.wait while flashing is complete it take a few minut to flash after success.insert battery and you are done switch on your smartphone.

So This is the Complete Guide to Install Stock Rom on TECNO Phantom 6S if you have any question Let Us Know Via Comment,
Search tag-

Stock Rom for TECNO Phantom 6S, flash file for TECNO Phantom 6S, firmware download for TECNO Phantom 6S, cara install stock ROM on TECNO Phantom 6S, rom for TECNO Phantom 6S, unbrick package for TECNO Phantom 6S, TECNO Phantom 6S hard reset, TECNO Phantom 6S flashing instructions, cara rom install on TECNO Phantom 6S, rom file for TECNO Phantom 6S, rom download guide for TECNO Phantom 6S,custom Rom, cm14, cm13, lineage os,